Fluke 27 Ii: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Fluke 27 II Information

the information about the Fluke 27 II digital multimeter:

Introduction

The Fluke 27 II is a rugged digital multimeter designed for use in harsh industrial environments. It is IP67 rated, which means it is dustproof and waterproof to a depth of 1 meter for 30 minutes. It also has an extended operating temperature range of -15 to 55 degrees Celsius.

The Fluke 27 II has a number of features that make it ideal for industrial use, including:

• True-RMS measurement for accurate readings of non-linear signals
• 10,000 μF capacitance measurement range
• 200 kHz frequency measurement range
• Min/Max and average recording
• Backlit display for easy viewing in low-light conditions

Specifications

The full specifications of the Fluke 27 II are as follows:

Feature	Specification
Voltage range	AC: 600 V, DC: 1000 V
Current range	AC: 10 A, DC: 20 A (30 seconds)
Resistance range	400 kΩ
Capacitance range	10,000 μF
Frequency range	200 kHz
Accuracy	DC voltage: ±0.02%, AC voltage: ±0.1%, DC current: ±0.2%, resistance: ±0.5%
Resolution	DC voltage: 1 mV, AC voltage: 10 mV, DC current: 1 μA, resistance: 1 Ω
Backlight	Yes
Dimensions	180 x 75 x 36 mm
Weight	340 g

Features

In addition to the features listed above, the Fluke 27 II also has a number of other features that make it a versatile and powerful tool for industrial electricians and technicians. These features include:

• Auto-ranging: The multimeter automatically selects the correct range for the measurement being made, eliminating the need to switch ranges manually.
• Data hold: The multimeter can hold the current measurement on the display for easy viewing.
• Continuity buzzer: The multimeter emits a beep when there is continuity between two points, making it easy to identify broken wires or circuits.
• Diode test: The multimeter can test the forward voltage of a diode, which can be used to identify the polarity of a diode or to check for a short circuit.

What's in the box

The Fluke 27 II comes in a carrying case that includes the following items:

• Multimeter
• Test leads
• Instruction manual
• Warranty card

Pricing

The Fluke 27 II is available for purchase from authorized Fluke distributors. The price varies depending on the region and the specific retailer.

Overall

The Fluke 27 II is a powerful and versatile digital multimeter that is ideal for use in harsh industrial environments. It is accurate, reliable, and easy to use. If you are an industrial electrician or technician, the Fluke 27 II is a valuable tool that you should consider adding to your toolkit.

Here is an image of the Fluke 27 II:

I hope this information is helpful. Please let me know if you have any other questions.

Fluke 27 II Compare with Similar Item

a comparison of the Fluke 27 II with some similar multimeters:

Feature	Fluke 27 II	Fluke 87V MAX	Fluke 101	Fluke 177
Accuracy	0.02%	0.02%	1%	0.05%
Range	AC/DC voltage: 1000V	AC/DC voltage: 1000V	AC/DC voltage: 600V	AC/DC voltage: 600V
Current:	10A	400A	10A	10A
Resistance:	40MΩ	40MΩ	400KΩ	400KΩ
Temperature:	400°C	400°C	100°C	100°C
Dimensions	7.8 x 3.94 x 2.5 inches	8.2 x 3.7 x 2.4 inches	7.2 x 3.9 x 1.9 inches	7.5 x 3.7 x 2.1 inches
Weight	300 grams	340 grams	250 grams	270 grams
Price	$129	$299	$59	$149

As you can see, the Fluke 27 II is a mid-range multimeter that offers good accuracy and features. It is not as rugged or as expensive as the Fluke 87V MAX, but it is still a good option for professionals and hobbyists alike. The Fluke 101 is a more basic multimeter that is ideal for home use. It is less accurate and has fewer features than the Fluke 27 II, but it is also much cheaper. The Fluke 177 is a more advanced multimeter that offers a wider range of features, including a built-in temperature probe. It is more expensive than the Fluke 27 II, but it is a good option for electricians and other professionals who need a multimeter with more capabilities.

Ultimately, the best multimeter for you will depend on your needs and budget. If you are a professional electrician or technician, the Fluke 87V MAX is a good option. If you are a hobbyist or home user, the Fluke 27 II or Fluke 101 are good choices.

Here are some additional things to consider when choosing a multimeter:

• Ruggedness: If you will be using the multimeter in harsh environments, such as on construction sites or in industrial settings, you will need a rugged multimeter that can withstand drops and other impacts.
• Features: Consider the features that are important to you, such as the ability to measure AC/DC voltage, current, resistance, capacitance, and temperature.
• Price: Multimeters can range in price from a few dozen dollars to several hundred dollars. Set a budget before you start shopping so that you don't overspend.

I hope this information helps you choose the best multimeter for your needs.

Fluke 27 II Pros/Cons and My Thought

the pros and cons of the Fluke 27 II multimeter, as well as some user reviews:

Pros:

• Rugged and durable construction
• IP67 dust and water resistance
• 10-foot drop test rating
• MSHA mine-safety approved
• Fast autoranging with quick refresh rate
• Min/Max and peak hold modes
• AutoHOLD feature
• Large, easy-to-read display
• Backlit display for low-light conditions
• Long battery life

Cons:

• No temperature scale
• Slightly less accurate than other multimeters in the 20 Series
• Average-only responding RMS device (not True RMS)
• Can be a bit bulky and heavy

User reviews:

• Positive: "This is a great multimeter for the price. It's tough, accurate, and has all the features I need."
• Negative: "I wish it had a temperature scale. Also, the average-only RMS responding can be a problem if you're measuring AC variable speed outputs."

My thoughts:

The Fluke 27 II is a good multimeter for the price. It's rugged, accurate, and has a long battery life. However, it does lack some features, such as a temperature scale and True RMS responding. If you need those features, you'll need to spend more money on a higher-end multimeter.

Overall, the Fluke 27 II is a good choice for most people who need a reliable and accurate multimeter. It's not the cheapest multimeter on the market, but it's worth the extra money if you need a durable and well-featured tool.

Here are some other multimeters that you may want to consider:

• Extech EX330 True RMS Multimeter
• Klein Tools MM300 True RMS Multimeter
• Amprobe AM330 True RMS Multimeter

These multimeters are all more expensive than the Fluke 27 II, but they offer more features, such as True RMS responding and a temperature scale.

Ultimately, the best multimeter for you will depend on your needs and budget. If you're looking for a rugged and accurate multimeter that doesn't break the bank, the Fluke 27 II is a good option. If you need more features, such as True RMS responding and a temperature scale, you'll need to spend more money on a higher-end multimeter.

Fluke 27 II Where To Buy

some places where you can buy the Fluke 27 II multimeter and spare parts:

• FlukeDirect: This is the official website of Fluke, so you can be sure that you are getting an authentic product. They also have a wide selection of spare parts available.
• Walmart: Walmart is a major retailer that carries a wide variety of products, including the Fluke 27 II multimeter. You can usually find it in-store or online.
• Amazon: Amazon is another major retailer that sells the Fluke 27 II multimeter. You can usually find it at a discounted price on Amazon.
• Best Buy: Best Buy is a electronics retailer that also carries the Fluke 27 II multimeter. You can usually find it in-store or online.
• Lowes: Lowe's is a home improvement retailer that also carries the Fluke 27 II multimeter. You can usually find it in-store or online.
• eBay: eBay is an online marketplace where you can find a variety of products, including the Fluke 27 II multimeter. You may be able to find it at a discounted price on eBay.

I hope this helps!

As for spare parts, you can also buy them from FlukeDirect, Amazon, or eBay. However, it is important to make sure that you are buying genuine Fluke parts, as counterfeit parts can be dangerous.

Here are some tips for buying genuine Fluke parts:

• Only buy from authorized Fluke dealers.
• Look for the Fluke logo on the packaging.
• Make sure the part number matches the part number for your multimeter.
• Read the reviews before you buy.

I hope this helps!

Fluke 27 II Problems and Solutions

some common issues and solutions for the Fluke 27 II multimeter, as per experts:

• The multimeter is not turning on.
  1. Make sure that the multimeter is properly connected to a power source.
  2. Check the battery or the fuse for any issues. If necessary, replace them with new ones.
  3. Try resetting the multimeter by pressing and holding the “on/off” button for several seconds.
• The display is blank.
  1. Make sure that the multimeter is turned on and that the correct function is selected.
  2. Check the battery or the fuse for any issues. If necessary, replace them with new ones.
  3. Try cleaning the display with a soft, dry cloth.
• The readings are inaccurate.
  1. Make sure that the multimeter is properly calibrated.
  2. Check the probes for any damage or corrosion. If necessary, replace them with new ones.
  3. Try using a different set of batteries.
• The multimeter is not working properly in certain ranges.
  1. Make sure that the multimeter is set to the correct range.
  2. Check the probes for any damage or corrosion. If necessary, replace them with new ones.
  3. Try using a different set of batteries.

If you have tried all of the above and your Fluke 27 II multimeter is still not working properly, you may need to contact Fluke customer support for further assistance.

Here are some additional tips for troubleshooting common Fluke 27 II multimeter problems:

• Always follow the manufacturer's instructions when using the multimeter.
• Be careful not to overload the multimeter.
• Store the multimeter in a safe place when not in use.
• Clean the multimeter regularly with a soft, dry cloth.

By following these tips, you can help to prevent common problems with your Fluke 27 II multimeter and extend its lifespan.

Fluke 27 II Manual

the Fluke 27 II manual in 1000 words:

Safety Information

• Read and understand all safety information in this manual before using the Fluke 27 II multimeter.
• The Fluke 27 II is a Class II, CAT III 1000 V, CAT IV 600 V multimeter. This means that it is designed to be used in circuits with a maximum voltage of 1000 V for Class II and 600 V for Class IV.
• Do not use the Fluke 27 II in circuits with a higher voltage than this.
• Do not use the Fluke 27 II if it is damaged.
• Make sure the battery door is closed and sealed tightly before using the Fluke 27 II.
• Do not expose the Fluke 27 II to water or other liquids.
• Do not use the Fluke 27 II in dusty or dirty environments.
• Do not drop the Fluke 27 II.

Before Use

• Install the batteries.
• Make sure the battery door is closed and sealed tightly.
• Select the correct range for the measurement you are making.
• Connect the test leads to the appropriate jacks.
• Touch the test leads to the points you want to measure.
• Read the measurement in the display.

Troubleshooting

• If the Fluke 27 II is not working properly, check the following:
  • Are the batteries installed correctly?
  • Is the meter set to the correct range?
  • Are the test leads connected to the correct jacks?
  • Are the test leads damaged?
  • Is the meter damaged?

If you have checked all of these things and the Fluke 27 II is still not working properly, contact Fluke Technical Support for assistance.

Maintenance

• Clean the Fluke 27 II with a soft, damp cloth.
• Do not use harsh chemicals or solvents to clean the Fluke 27 II.
• Do not use compressed air to clean the Fluke 27 II.
• Do not disassemble the Fluke 27 II.

Warranty

The Fluke 27 II is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If the Fluke 27 II becomes defective during the warranty period, Fluke will repair or replace it, at its option, free of charge.

Contact Information

• Fluke Corporation
• 6955 Lusk Boulevard
• Everett, WA 98203
• USA
• Phone: 1-800-443-5853
• Email: [email protected]
• Website: www.fluke.com

Additional Information

• The Fluke 27 II can be used to measure a variety of electrical quantities, including:
  • Voltage
  • Current
  • Resistance
  • Continuity
  • Diode test
  • Capacitance
  • Frequency
  • Duty cycle
• The Fluke 27 II also has a number of features that make it a valuable tool for electrical troubleshooting, including:
  • Min/Max and average recording
  • Data hold
  • Auto power off
  • Backlit display

I hope this manual has been helpful. Please contact Fluke Technical Support if you have any further questions.